Important knowledge of new dry process cement
Definition of New Dry-Process Cement Production
Answer:
New dry-process cement production is a modernized method of cement manufacturing that centers on suspension preheating and pre-decomposition technology. It integrates modern science, technology, and the latest industrial achievements throughout the entire production process. This method gives cement production the characteristics of high efficiency, high quality, resource conservation, clean production, compliance with environmental protection requirements, large-scale operation, automation, and scientific management.
Characteristics of New Dry-Process Cement Production
Answer:
① Modern pre-homogenization technology is widely used throughout the entire raw material preparation process. The sequence of mining → raw material pre-homogenization → raw material grinding → raw material homogenization forms a complete "homogenization chain."
② The traditional rotary kiln method of preheating and decomposing materials in a stacked state has been replaced by suspension preheating and pre-decomposition technology.
③ High-efficiency, multi-functional extrusion milling technology and new mechanical powder conveying devices are adopted.
④ Large-scale process equipment is used, promoting the cement industry's development toward greater intensification.
⑤ Favorable conditions are created for clean production and the extensive use of slag, waste, renewable fuels, and the decomposition of toxic and hazardous wastes.
⑥ Production is automated.
⑦ New heat-resistant, wear-resistant, and heat-insulating refractory materials, along with supporting materials, are widely used.
⑧ Information technology is applied to implement modern scientific management.
Five Stabilities to Ensure One Stability
Answer:
To ensure good fuel combustion and effective heat transfer in the system-and thus maintain a stable thermal regime-the production process must uphold five key stabilities: stable chemical composition of raw materials, stable raw material feeding, stable fuel composition, stable fuel feeding, and stable equipment operation. This concept is referred to as the "five stabilities to ensure one stability."
In cement kiln production, only by maintaining the "five stabilities" can all technical parameters remain at their optimal values, and production stay in its best state, thereby achieving the greatest economic benefits.
On the other hand, if the objective laws are disregarded, scientific management is ignored, and balanced and stable production is not maintained-especially when production is blindly pursued-this can lead to thermal system instability in the kiln, resulting in outcomes contrary to expectations and ultimately causing unnecessary losses.
Pre-homogenization of raw materials
The Significance and Development of Raw Material Pre-Homogenization
Answer:
① It helps stabilize the chemical composition of the raw materials entering the cement kiln.
② It facilitates the broader utilization of available resources.
③ It supports the use of interlayer waste rock from mines, thereby extending the service life of the mine.
④ It meets the dual requirements of raw material storage and homogenization while reducing investment in construction facilities.
Since the 1980s, with the development of new dry-process cement production, raw material pre-homogenization technology has been widely applied.
Basic Principles and Functions of Raw Material Pre-Homogenization
Answer:
The basic principle of raw material pre-homogenization lies in the concept of "laying flat and taking straight." This means that during the stacking process, the material should be laid as evenly and parallel as possible, with layers of uniform thickness, forming a well-structured pile. When reclaiming the material, the direction of extraction should be perpendicular to the layers, cutting through all layers as uniformly as possible, progressing sequentially until the pile is depleted.
In the pre-homogenization yard, raw materials serve a dual function: storage and pre-homogenization.
Types of Pre-Homogenization Yards
Answer:
There are generally three types of pre-homogenization yards:
① Raw material pre-homogenization yards
② Pre-batching yards
③ Batching yards
Selection Conditions for Raw Material Pre-Homogenization Yards
Answer:
In cement production, the decision to build a pre-homogenization yard depends on fluctuations in raw material composition and specific production requirements. The conditions are determined based on the following factors:
① Requirements of the production process
② The degree of fluctuation in the composition of raw materials
③ Comprehensive consideration of the specific conditions of the raw material source or mine
Main Factors Affecting the Effect of Pre-Homogenization
Answer:
① Non-normal distribution of raw material composition fluctuations
② Material segregation
③ Adverse effects caused by the conical end (vertex) of the pile
④ Inconsistent stacking caused by uneven operation of the stacker
⑤ Influence of the number of material layers in the pile
Effects of Material Segregation and Preventive Measures
Answer:
Segregation of material particles can cause compositional fluctuations across the cross-section of the pile, leading to the so-called "short lag" phenomenon.
Preventive Measures:
① Reduce differences in particle size distribution of the materials
② Strengthen pile management-use herringbone stacking to reduce segregation and minimize the material dropping height during stacking
③ Strengthen material extraction management-ensure that the reclaimer can cut through and extract material evenly across all layers at the end face of the pile
Rectangular Pre-Homogenization Yard:
① There are generally two piles in the yard-one for stacking and one for reclaiming-operated alternately. The typical length-to-width ratio is 5:1 to 6:1.
② The two piles can be arranged in parallel or in a straight line, depending on the terrain.
③ The feeding and discharging conveyors are located on both sides of the yard. Although a parallel pile arrangement is more convenient in the general layout, it requires the reclaimer to move parallel to both piles on one side using a transfer cart. The stacker should be either rotary or double-armed to accommodate the two parallel piles.
Circular Pre-Homogenization Yard:
① Raw materials are delivered to the center of the yard via a belt conveyor. A cantilever belt conveyor rotates 360 degrees around the center to perform stacking.
② Reclaiming is carried out using a bridge-type scraper reclaimer.
Comparison of Rectangular and Circular Pre-Homogenization Yards:
① Footprint: For the same effective storage capacity, the rectangular yard occupies a larger area, while the circular yard can reduce land usage by approximately 30%–40%.
② Investment Required: Equipment costs for circular yards are generally lower. Total investment can be reduced by about 25%–40% compared to rectangular yards.
③ Homogenization Effect: Due to the large difference in radius between the inner and outer rings, material distribution in a circular yard is less uniform than in a rectangular yard, resulting in a weaker homogenization effect.
④ Equipment Operation and Maintenance: Equipment in circular yards is simpler, easier to operate, and requires less maintenance than that of rectangular yards.
⑤ Enterprise Expansion and Renovation: Rectangular yards can be expanded based on site conditions and production needs. Circular yards, however, cannot be expanded in place and require construction of a completely new yard if expansion is needed.

