Magnesia Alumina Chrome Spinel Brick

Magnesia Alumina Chrome Spinel Brick

Magnesia Alumina Chrome Spinel Brick are specialty refractory bricks made from a composite of magnesium-aluminate-chrome spinel and fused magnesite, with the addition of special additives

●  High spalling resistance.
●  Strong strength and erosion resistance.
●  Easily forms protective kiln skin.
●  Good abrasion resistance.
Send Inquiry
Description

 

18ec2cdec8be5ae568e5ce0d54d0b13

Introduction

 

Magnesia Alumina Chrome Spinel Bricks are specialty refractory bricks made from a composite of magnesium-aluminate-chrome spinel and fused magnesite, with the addition of special additives. These bricks exhibit properties such as erosion resistance, wear resistance, spalling resistance, and a strong affinity for zinc leachate slags.

Composition and Structure

Main components: Magnesium oxide (MgO), aluminum oxide (Al₂O₃), chromium oxide (Cr₂O₃).

Spinel phase: Magnesium-aluminum spinel (MgAl₂O₄) and magnesium-chromium spinel (MgCr₂O₄) are formed through high-temperature sintering, synergistically enhancing the material's properties.

Advantage

 

High temperature resistance: Melting point over 2000°C, suitable for high-temperature environments such as steel smelting and cement kilns.

 

Thermal shock resistance: The spinel structure relieves stress from sudden temperature changes, reducing the risk of cracking.

 

Resistance to chemical attack: Resistant to acid and alkaline slag penetration; particularly effective in steel converters and electric furnaces.

 

High strength: Aluminum oxide increases hardness and wear resistance, while the spinel phase improves thermal shock resistance and structural stability.

 

Oxidation resistance: Chromium oxide remains stable in both oxidizing and reducing atmospheres.

 
Zinfon Refractory Technology Co.,Ltd.
 

We provide one-stop services from technical consultation to design, production, and after-sales support.

1
Manufacturer Direct
2
Factory Prices
3
Premium Service
4
Customization Available

Raw Materials

MgO, Al₂O₃, Cr₂O₃

 

Physical and Chemical Specifications

 

Item

YXMLGe-80

YXMLGe-75

MgO(%)≥

80

75

Al₂O₃ (%)

9-13

9-13

Cr₂O₃ (%)

3-5

3-5

Apparent Porosity (%)≤

18

18

Cold Crushing Stréngth (MPa)≥

50

40

Refractoriness Under Load (℃)≥

1680

1650

Thermal Shock Resistance

(1100℃,water quenching,cycle)≥

10

8

 

Processe

 

Raw material pretreatment → dosing and mixing → molding → drying → high-temperature sintering → post-processing → quality inspection

 

application

 

Iron and steel industry: Ladle lining, converter mouth, electric arc furnace wall.

Cement and glass industry: Rotary kiln transition zone, glass furnace regenerator chamber.

Chemical industry:Corrosion-resistant reactor and pipeline linings.

 

Comparison: Magnesia Alumina Chrome Spinel Brick vs. Magnesia Alumina Spinel Brick

 

I. Basic Ingredient Comparison

Magnesia-Alumina Spinel Bricks: Key elements are MgO and Al₂O₃, with impurity content ≤ 0.5% (Fe₂O₃, SiO₂).

Magnesia-Alumina-Chrome Spinel Bricks: Key elements are MgO, Al₂O₃, and Cr₂O₃ (mainly Cr³⁺), with impurity content ≤ 1.0%.

II Performance Differences

1. Erosion resistance

Cr₂O₃ enhances resistance to acidic and neutral slags (e.g., glass liquids, non-ferrous metal melts).

Lower alkali vapor permeability (<1×10⁻¹² m²/s), offering 20–30% longer service life than Mg-Al spinel bricks.

 

2. Thermal shock stability

Cr³⁺ solid solution improves thermal expansion matching; thermal shock resistance exceeds 20 cycles.

Ideal for environments with frequent rapid heating and cooling (e.g., glass furnace fluid holes).

 

3. High temperature strength

Cr₂O₃ reinforcement increases compressive strength to ≥60 MPa at 1600°C; performance degradation rate is reduced to 0.5% per year.

III. Comparison of application scenarios

 

product-1600-482

Precautions for use

 

I. Construction and Masonry

Expansion joint reservation: Leave 2–3 mm expansion joints every 1.5–2 meters, filled with flexible refractory fibers (e.g., alumino-silicate fibers).

Magnetic positioning: Use magnetic locators to ensure misalignment rate <1%, preventing thermal stress-induced cracking.

Bonding agent selection

Use nano-modified phosphate binders with low free phosphate to avoid pH fluctuations that cause chalking.

 

II.Environmental Limitations

Temperature fluctuation: Avoid instantaneous temperature changes exceeding 200°C, especially in critical areas like fluid holes.

Chemical exposure:

Avoid contact with strong oxidizing gases (e.g., Cl₂, F⁻, HF), which may oxidize Cr³⁺ and cause matrix flaking.

In SiO₂-Al₂O₃ slag environments, apply a zirconia coating (≥1 mm) to improve erosion resistance.

 

III. Maintenance and Overhaul

Regular testing:

Porosity: Monitor quarterly (standard ≤3.5%). If annual increase exceeds 1%, shutdown and repairs are required.

Crack detection: Use ultrasonic testing for internal cracks; those >2 mm should be addressed.

Repair process:

Use magnesia-alumina-chrome spinel paste (Cr₂O₃ ≥5%) of matching composition and sintering compatibility.

Bake gradually post-repair (heating curve: 10°C/hour up to 1000°C) to avoid thermal stress cracking.

 

IV. Storage and Transportation

Storage:

Store in a dry warehouse with humidity <60%. Use plastic film between bricks to prevent moisture absorption and surface degradation.

Transportation:

Use wooden boxes with pearl cotton cushioning. Each brick should be individually packaged to prevent edge damage.

 

 

 

Why chooes us?

 

01/Customized dimensions and shapes

-

Figure-2-brickshapes-standard

Customized Brick Shape

Provide Sample Sheets--Mold Opening & Quotation--Mold Opening & Sample Making--Bulk Production Quotation--Contract Signing--Bulk Production

 

02/Delivery cycle and logistics

-

Sea freight, land freight. Determine the mode of transportation according to the needs

About 30 days, customized products delivery time depends on the actual situation.

 

03/Customized packaging

-

Customize your brand

Logo customization, custom fonts, taglines and messages for packaging, signage, websites or printed materials.

Take your brand to the next level, contact us today to discuss your project!

7f39f5ab2ecc4393b0c6f4b8c8898d431slrd1au5fo
O1CN01j52EIT1IY4mpaRRhA2202367050904-0-cib
R-C 1
R-C 2
3YES

04/Purchase ZINFON refractory Bricks at Reasonable Prices

-

The price of refractory bricks is a known key factor influencing customers' purchasing decisions. Therefore, we offer affordable refractory bricks for sale. Here are several reasons why ZINFON provides refractory bricks at competitive prices:

 
 

Factory price

By collaborating with ZINFON, we ensure that customers enjoy the ex-factory price of refractory bricks, reducing costs from middlemen or distributors. This allows customers to obtain the most cost-effective pricing directly from the source.

 
 
 

Low raw material cost

ZINFON is surrounded by abundant mineral resources. With these high-quality materials, customers can obtain products that are both affordable and excellent in performance.

 
 
 

Mass production

ZINFON possesses advanced production equipment and technologies, enabling the factory to achieve economies of scale and reduce unit production costs. Meanwhile, it ensures a continuous supply of high-quality products at preferential prices.

 

It is worth noting that while price is an important factor, it should not be the sole determinant of your purchasing decision. When buying refractory bricks from ZINFON, quality, reliability, and technical support are equally important considerations.

 

By choosing ZINFON as your supplier, you can access high-quality refractory bricks, a wide range of other refractory materials, and comprehensive support. Contact ZINFON Refractories immediately to discuss your specific requirements and obtain customized solutions!

 

How To Cooperate With Us?

7*24 hours online response

Provide professional after-sales protection

Our address

Qinghua Management Dist., Dashiqiao City, Yingkou City, Liaoning, China

Phone Number

+8613700131695

+8618540210631

E-mail

info@zinfon-refractory.com

modular-1

 

 

 

Hot Tags: magnesia alumina chrome spinel brick, China magnesia alumina chrome spinel brick manufacturers, suppliers, factory, Magnesium alumina spinel brick, Cement Rotary Kiln Firing Zone, spinel refractory, sintered magnesia, Hercynite Composite Brick, Magnesia iron spinel bricks for cement kiln