China insulating castable refractory Manufacturers Factory Suppliers
-
Mullite Insulation BrickMullite insulation bricks are a new type of refractory material in China that can directly contact flames.read more
● Good high-temperature stability.
● Low thermal... -
Soft Fire Brick•Lightweight structureread more
•excellent thermal insulation performance
•low thermal conductivity -
High Alumina BrickHigh alumina brick is one of the most widely used refractory bricks in the refractory industry.read more
● Resistant to both acidic and alkaline slag.
● Good thermal shock... -
Low-porosity Clay BrickLow-porosity clay bricks are made from low-alumina mullite as the main raw material, formed under high pressure and sintered at high temperatures.read more
● Low porosity with good... -
Silica Refractory BricksSilica bricks are acidic refractory materials with excellent resistance to acid slag erosion.read more
● Strong resistance to acidic slag erosion.
● High load softening... -
Fused Silica BrickFused silica bricks are produced through a special melting process, resulting in higher bulk density and lower porosity.read more
● High bulk density with strong mechanical... -
Sintered Zirconia Corundum BrickSintered AZS zirconia corundum bricks are made from high-quality zirconia (ZrO2) as the main raw material.read more
● High strength and excellent high-temperature performance.
●... -
Light Weight Fireclay BrickAlso known as light insulation firebricks, these are lightweight refractory materials made from refractory clay with an alumina content ranging from 30% to 46%.read more
● High... -
Light Weight High Alumina BrickAlso known as high-alumina insulating bricks, these light weight refractory materials contain more than 48% alumina and are mainly composed of mullite and glass phases or corundum.read more
●... -
Alumina Bubble BrickAlumina bubble bricks are thermal insulating refractory products made primarily from alumina bubbles and alumina powder, combined with other binders and fired at a high temperature of 1750°C....read more
-
Corundum BrickCorundum bricks refer to refractory material products with an alumina content greater than 90% and corundum as the main crystal phase.read more
● High hardness and wear resistance.... -
Honeycomb CeramicsHoneycomb Ceramics are material or device designed to store and release thermal energy, widely used in energy saving technologies for industrial thermal equipment.read more
● Excellent...
Wide range of insulating castables for general applications. Applicable for hot face and back-up lining constructions. Light Weight and Extra Light Weight castables are characterized by a high...
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make...
Wide range of insulating castables for general applications. Applicable for hot face and back-up lining constructions. Light Weight and Extra Light Weight castables are characterized by a high...
Clay Refractory . Coatings . Extruded Shape Cartop Extruded Block. Mineral Refractory . Mortar Dry Wet. Plastics / RAM Dolomite Mix Plastic RAM. ... RESCOCAST 6 is a high strength, special...
Insulating Castable Castable #16 CASTABLE #16 is an ultra-lightweight refractory concrete with a service limit of 1600oF as a hot face material and 1800oF as a backup insulation. CASTABLE #16 has a...
This castable insulation is non-water soluble and meets and exceeds A.S.T.M. C-401 requirements for structural strength and safety. Insul Cast ships in a 50-lb. bag and requires no additives for use,...
